|
Control line handle, that you use is a main detail between you and the model, it gives the
feeling of the model in your mind. Many pilots do it individual. This is good,
also this is doth bad.. Because, you can not repeat the same geometry configuration for another control handle. Another handle configuration it is long time not pleasure feeling that something wrong in your model feeling. If you use 2
or 3 models, you must replace single handle to another lines, it is another
regulation, you loose the precision regulation for the first model and you have many not pleasure feelings of step by
step necessity of regulation during some flights..
So, the requirement to the handle must be useful geometry, useful easy regulation. The
third requirement that I had found for me, it is the present of some of the same handled for some
models. It gives the possibility to regulate this control handle just for this
model and do not touch it if you change
the model. I had found the possibility to do this when it was done the CNC
machine production. The geometry is stabile, if you get different handles to the arm, you do not feel the difference. It
is the main advantage.
Also It was designed single bolt wire fixation, that is very useful and fast for
regulation.
It was designed 2 types of the control handle
configuration, straight (type 1, is more convenient for big palm) and with a some cutting in the place of a big
finger (type 2, is more convenient for average and small palm). Modification 1
| Modification 1 with bolt
 |
Modification 2
 | Modification 2 with bolt
 |
Colors:
 
 
 
|
